Skip to content

Comparison

Class full path: NemAll_Python_Geometry.Comparison

Class for comparison between two objects

Functions

AllPointsAreOneAxis(polyline, tolerance) staticmethod

Check if all points of polyline are on one straight line

Parameters:

Name Type Description Default
polyline Polyline2D

Polyline

required
tolerance float

Tolerance

required

Returns:

Type Description
bool

Result of the check

Congruent overload

Congruent(l1p1, l1p2, l2p1, l2p2) staticmethod

compare 2D points of two 2D lines if are congruent

Parameters:

Name Type Description Default
l1p1 Point2D

the 1. point of the 1. line

required
l1p2 Point2D

the 2. point of the 1. line

required
l2p1 Point2D

the 1. point of the 2. line

required
l2p2 Point2D

the 2. point of the 2. line

required

Returns:

Type Description
bool

true if lines are congruent, otherwise false.

Congruent(l1, l2) staticmethod

compare 2D lines if are congruent

Parameters:

Name Type Description Default
l1 Line2D

the 1. line

required
l2 Line2D

the 2. line

required

Returns:

Type Description
bool

true if lines are congruent, otherwise false.

DeterminePosition overload

DeterminePosition(geoObject_object, point, tolerance) staticmethod

Determine the relative position of a point to an object.

Parameters:

Name Type Description Default
geoObject_object object

IGeometry

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(line, point, tolerance) staticmethod

Determine the relative position of a point to a 2D line.

Parameters:

Name Type Description Default
line Line2D

2D line

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(axis, point, tolerance) staticmethod

Determine the relative position of a point to a 2D axis.

Parameters:

Name Type Description Default
axis Axis2D

2D axis

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement, eAbove, eBelow

DeterminePosition(polyline, point, tolerance) staticmethod

Determine the relative position of a point to a 2D polyline. Returns position of point to the closest line of poly line

Parameters:

Name Type Description Default
polyline Polyline2D

2D polyline

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(polyline, point, tolerance, segment) staticmethod

Determine the relative position of a point to a 2D polyline.

Parameters:

Name Type Description Default
polyline Polyline2D

2D polyline

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required
segment VecSizeTList

number of the segment of polyline in which was the point found (-1 - is not on polyline, 0 - first segm., ...)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(arc, point, tolerance) staticmethod

Determine the relative position of a point to a 2D arc.

Parameters:

Name Type Description Default
arc Arc2D

2D arc

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(arc, point, tolerance) staticmethod

Determine the relative position of a point to a 3D arc.

Parameters:

Name Type Description Default
arc Arc3D

3D arc

required
point Point3D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(clothoid, point, tolerance) staticmethod

Determine the relative position of a point to a 2D clothoid.

Parameters:

Name Type Description Default
clothoid Clothoid2D

2D clothoid

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(spline, point, tolerance) staticmethod

Determine the relative position of a point to a 2D spline.

Parameters:

Name Type Description Default
spline Spline2D

2D spline

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(polygon, point, tolerance) staticmethod

Determine the relative position of a point to a polygon 2D.

Parameters:

Name Type Description Default
polygon Polygon2D

Polygon2D

required
point Point2D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eInside(inside the polygon), eOutside, eOnElement (on one of the edges), eEqualToEndPoint or Unknown

DeterminePosition(polygon, line) staticmethod

Determine the relative position of a line to a polygon 2D.

Parameters:

Name Type Description Default
polygon Polygon2D

Polygon2D

required
line Line2D

Line

required

Returns:

Type Description
eComparisionResult

eInside(inside the polygon), eOutside, eNotParallel(the line crosses the polygon), eOnElement (on one of the edges), or Unknown

DeterminePosition(line, point, tolerance) staticmethod

Determine the relative position of a point to a 3D line

Parameters:

Name Type Description Default
line Line3D

3D line

required
point Point3D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(polyline, point, tolerance) staticmethod

Determine the relative position of a point to a 3D polyline

Parameters:

Name Type Description Default
polyline Polyline3D

3D polyline

required
point Point3D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eLeft, eRight, eAbove, eBelow

DeterminePosition(phed, point) staticmethod

Determine the relative position of a point to a Polyhedron

Parameters:

Name Type Description Default
phed Polyhedron3D

Polyhedron

required
point Point3D

Point

required

Returns:

Type Description
eComparisionResult

eInside,eOutside

DeterminePosition(spline, point, tolerance) staticmethod

Determine the relative position of a point to a Spline3D

Parameters:

Name Type Description Default
spline Spline3D

Spline3D

required
point Point3D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eOutside

DeterminePosition(spline, point, tolerance) staticmethod

Determine the relative position of a point to a BSpline3D

Parameters:

Name Type Description Default
spline BSpline3D

BSpline3D

required
point Point3D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eOutside

DeterminePosition(path, point, tolerance) staticmethod

Determine the relative position of a point to a Path3D

Parameters:

Name Type Description Default
path Path3D

Path3D

required
point Point3D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(between start and end points), eEqualToStartPoint, eEqualToEndPoint, eOutside

DeterminePosition(b, point, tolerance) staticmethod

Determine the relative position of a point to a 3D BRep

Parameters:

Name Type Description Default
b BRep3D

BRep3D

required
point Point3D

Point

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eOnElement(identical to a vertes of the BRep), eInside (inside the BRep)

DeterminePosition(polygon1, polygon2) staticmethod

Determine the relative position of the second polygon to the first polygon

Parameters:

Name Type Description Default
polygon1 Polygon2D

the first polygon

required
polygon2 Polygon2D

the second polygon

required

Returns:

Type Description
eComparisionResult

eInside,eOutside,eCrossing

DeterminePosition(line, minMax) staticmethod

Determine the relative position of minMax to line

Parameters:

Name Type Description Default
line Line2D

line

required
minMax MinMax2D

minmax

required

Returns:

Type Description
eComparisionResult

eOutside,eCrossing,eUnknown

DeterminePosition(lines, minMax) staticmethod

Determine the relative position of the minMax to lines

Parameters:

Name Type Description Default
lines Line2DList

lines

required
minMax MinMax2D

minmax

required

Returns:

Type Description
eComparisionResult

eOutside,eCrossing,eUnknown

DeterminePosition(igeo_object, point, tolerance) staticmethod

Determine the relative position of a point to a 3D geometry

Parameters:

Name Type Description Default
igeo_object object

3D geometry

required
point Point3D

Point3D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
eComparisionResult

eInside,eOutside

Equal overload

Equal(el1, el2) staticmethod

Compare 2 doubles

Parameters:

Name Type Description Default
el1 float
  1. element
required
el2 float
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2) staticmethod

compare 2 2D points

Parameters:

Name Type Description Default
el1 Point2D
  1. element
required
el2 Point2D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2) staticmethod

compare 2 3D points

Parameters:

Name Type Description Default
el1 Point3D
  1. element
required
el2 Point3D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2) staticmethod

compare 2 2D vectors

Parameters:

Name Type Description Default
el1 Vector2D
  1. element
required
el2 Vector2D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2) staticmethod

compare 2 3D vectors

Parameters:

Name Type Description Default
el1 Vector3D
  1. element
required
el2 Vector3D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 doubles with given tolerance

Parameters:

Name Type Description Default
el1 float
  1. element
required
el2 float
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 2D points with given tolerance

Parameters:

Name Type Description Default
el1 Point2D
  1. element
required
el2 Point2D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 3D points with given tolerance

Parameters:

Name Type Description Default
el1 Point3D
  1. element
required
el2 Point3D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 2D vectors with given tolerance

Parameters:

Name Type Description Default
el1 Vector2D
  1. element
required
el2 Vector2D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 3D vectors with given tolerance

Parameters:

Name Type Description Default
el1 Vector3D
  1. element
required
el2 Vector3D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 line 2D with given tolerance

Parameters:

Name Type Description Default
el1 Line2D
  1. element
required
el2 Line2D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 line 3D with given tolerance

Parameters:

Name Type Description Default
el1 Line3D
  1. element
required
el2 Line3D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 splines with given tolerance

Parameters:

Name Type Description Default
el1 Spline2D
  1. element
required
el2 Spline2D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 clothoides with given tolerance

Parameters:

Name Type Description Default
el1 Clothoid2D
  1. element
required
el2 Clothoid2D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 arcs with given tolerance

Parameters:

Name Type Description Default
el1 Arc2D
  1. element
required
el2 Arc2D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

compare 2 3D arcs with given tolerance

Parameters:

Name Type Description Default
el1 Arc3D
  1. element
required
el2 Arc3D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

Equal(el1, el2, tol) staticmethod

Compare 2 BSplines with given tolerance

Parameters:

Name Type Description Default
el1 BSpline3D
  1. element
required
el2 BSpline3D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal

Equal(el1, el2, tol) staticmethod

Compare 2 Splines with given tolerance

Parameters:

Name Type Description Default
el1 Spline3D
  1. element
required
el2 Spline3D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal

Equal(el1, el2, tol) staticmethod

Compare 2 Polylines with given tolerance

Parameters:

Name Type Description Default
el1 Polyline3D
  1. element
required
el2 Polyline3D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal

Equal(el1, el2, tol) staticmethod

Compare 2 BSplines with given tolerance

Parameters:

Name Type Description Default
el1 BSpline2D
  1. element
required
el2 BSpline2D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal

Equal(path1, path2, tol) staticmethod

Compare 2 Paths with given tolerance

Parameters:

Name Type Description Default
path1 Path3D
  1. element
required
path2 Path3D
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal

Equal(igeo1_object, igeo2_object, tol) staticmethod

Compare 2 geometries with given tolerance

Parameters:

Name Type Description Default
igeo1_object object
  1. element
required
igeo2_object object
  1. element
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal

EqualCoordsRel overload

EqualCoordsRel(el1, el2) staticmethod

compare 2 2D points using iqrkor

Parameters:

Name Type Description Default
el1 Point2D
  1. element
required
el2 Point2D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualCoordsRel(el1, el2) staticmethod

compare 2 3D points using iqrkor

Parameters:

Name Type Description Default
el1 Point3D
  1. element
required
el2 Point3D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualDistance overload

EqualDistance(el1, el2, tol) staticmethod

compare 2 2D points using their distance with given tolerance

Parameters:

Name Type Description Default
el1 Point2D
  1. point
required
el2 Point2D
  1. point
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualDistance(el1, el2, tol) staticmethod

compare 2 2D points using their distance with given tolerance

Parameters:

Name Type Description Default
el1 Point3D
  1. point
required
el2 Point3D
  1. point
required
tol float

tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualRel overload

EqualRel(el1, el2) staticmethod

compare 2 doubles using built-in relative tolerance

Parameters:

Name Type Description Default
el1 float
  1. element
required
el2 float
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualRel(el1, el2, tol) staticmethod

compare 2 doubles using given relative tolerance

Parameters:

Name Type Description Default
el1 float
  1. element
required
el2 float
  1. element
required
tol float

relative tolerance

required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualRel(el1, el2) staticmethod

compare 2 2D points using built-in relative tolerance

Parameters:

Name Type Description Default
el1 Point2D
  1. element
required
el2 Point2D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualRel(el1, el2) staticmethod

compare 2 3D points using built-in relative tolerance

Parameters:

Name Type Description Default
el1 Point3D
  1. element
required
el2 Point3D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualRel(el1, el2) staticmethod

compare 2 2D vectors using built-in relative tolerance

Parameters:

Name Type Description Default
el1 Vector2D
  1. element
required
el2 Vector2D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

EqualRel(el1, el2) staticmethod

compare 2 3D vectors using built-in relative tolerance

Parameters:

Name Type Description Default
el1 Vector3D
  1. element
required
el2 Vector3D
  1. element
required

Returns:

Type Description
bool

true when equal, otherwise false.

GetSegmentNumber overload

GetSegmentNumber(geoObject_object, segment, tolerance) staticmethod

Determine the segment position of a point to a 2D geometry object

Parameters:

Name Type Description Default
geoObject_object object

IGeometry

required
segment Line2D

Line2D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(geoObject_object, point, tolerance) staticmethod

Determine the segment position of a point to a geometry object

Parameters:

Name Type Description Default
geoObject_object object

IGeometry

required
point Point3D

Point3D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(geoObject_object, point, tolerance) staticmethod

Determine the segment position of a point to a 2D geometry object

Parameters:

Name Type Description Default
geoObject_object object

IGeometry

required
point Point2D

Point2D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(line, point, tolerance) staticmethod

Determine the segment position of a point to a Line2D

Parameters:

Name Type Description Default
line Line2D

Line2D

required
point Point2D

Point2D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(line, point, tolerance) staticmethod

Determine the segment position of a point to a Line3D

Parameters:

Name Type Description Default
line Line3D

Line3D

required
point Point3D

Point3D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(polyPoints, point, tolerance) staticmethod

Determine the segment position of a point to a PolyPoints

Parameters:

Name Type Description Default
polyPoints PolyPoints2D

PolyPoints

required
point Point2D

Point2D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(polygon, point, tolerance) staticmethod

Determine the segment position of a point to a Polygon2D

Parameters:

Name Type Description Default
polygon Polygon2D

Polygon2D

required
point Point2D

Point2D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(polyPoints, point, tolerance) staticmethod

Determine the segment position of a point to a PolyPoints

Parameters:

Name Type Description Default
polyPoints PolyPoints3D

PolyPoints

required
point Point3D

Point3D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(spline, point, tolerance) staticmethod

Determine the segment position of a point to a Spline2d

Parameters:

Name Type Description Default
spline Spline2D

spline geo

required
point Point2D

point on spline

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(line, segment, tolerance) staticmethod

Determine the segment position of a point to a Line2D

Parameters:

Name Type Description Default
line Line2D

Line2D

required
segment Line2D

Line2D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(line, segment, tolerance) staticmethod

Determine the segment position of a point to a Line3D

Parameters:

Name Type Description Default
line Line3D

Line3D

required
segment Line3D

Line3D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(polyPoints, segment, tolerance) staticmethod

Determine the segment position of a point to a PolyPoints

Parameters:

Name Type Description Default
polyPoints PolyPoints2D

PolyPoints

required
segment Line2D

Line2D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(polyPoints, segment, tolerance) staticmethod

Determine the segment position of a point to a PolyPoints

Parameters:

Name Type Description Default
polyPoints PolyPoints3D

PolyPoints

required
segment Line3D

Line3D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

GetSegmentNumber(geoObject_object, segment, tolerance) staticmethod

Determine the segment position of a point to a geometry object

Parameters:

Name Type Description Default
geoObject_object object

IGeometry

required
segment Line3D

Line3D

required
tolerance float

tolerance (if distance < tolerance, point on object)

required

Returns:

Type Description
int

segment number 0 is first element

HitsElement(result) staticmethod

Check if comparison result hits element in some way

Parameters:

Name Type Description Default
result eComparisionResult

the comparison result to check

required

Returns:

Type Description
bool

true, if the result indicates that the element is hit, otherwise false e.g. left, right, etc.

IsInside overload

IsInside(polygon, line) staticmethod

Determine if the line is inside the polygon

Parameters:

Name Type Description Default
polygon Polygon2D

Polygon

required
line Line2D

Line

required

Returns:

Type Description
bool

true, if the line is inside the polygon

IsInside(line, lineToCheck) staticmethod

IsParallel overload

IsParallel(el1, el2) staticmethod

test 2 2D lines for parallel

Parameters:

Name Type Description Default
el1 Line2D
  1. element
required
el2 Line2D
  1. element
required

Returns:

Type Description
eComparisionResult

eParallel, eAntiParallel, eNotParallel,

float

result distance)

IsParallel(lines) staticmethod

Check of parallelism for vector of 2D lines

Return eAntiParallel if at least one line is antiparallel and all rest are parallel Return eNotParallel if at least one line is not parallel In all rest cases return eParallel

Parameters:

Name Type Description Default
lines Line2DList
  • vector of 2D lines
required

Returns:

Type Description
eComparisionResult

eParallel, eAntiParallel, eNotParallel

IsParallel(el1, el2) staticmethod

test 2 3D lines for parallel

Parameters:

Name Type Description Default
el1 Line3D
  1. element
required
el2 Line3D
  1. element
required

Returns:

Type Description
eComparisionResult

eParallel, eAntiParallel, eNotParallel,

float

result distance)

IsParallel(el1_object, el2_object) staticmethod

test 2 Geometry object for parallel

Parameters:

Name Type Description Default
el1_object object
  1. element
required
el2_object object
  1. element
required

Returns:

Type Description
eComparisionResult

eParallel, eAntiParallel, eNotParallel,

float

result distance)

Overlapped overload

Overlapped(el1, el2) staticmethod

compare of 2 Polyline 2D

Parameters:

Name Type Description Default
el1 Polyline2D

Polyline2D

required
el2 Polyline2D

Polyline2D

required

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(el1, el2, partiallyToo=False) staticmethod

compare of 2 Polyline 3D

Parameters:

Name Type Description Default
el1 Polyline3D

Polyline3D

required
el2 Polyline3D

Polyline3D

required
partiallyToo bool

First and last segment of polyline have not be identical but is enough that lies on the second polyline segments

False

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(pp1, pp2) staticmethod

compare of PolyPoints

Parameters:

Name Type Description Default
pp1 PolyPoints2D

PolyPoints

required
pp2 PolyPoints2D

PolyPoints

required

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(pp1, pp2) staticmethod

compare of PolyPoints

Parameters:

Name Type Description Default
pp1 PolyPoints3D

PolyPoints

required
pp2 PolyPoints3D

PolyPoints

required

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(line1, line2) staticmethod

compare of 2 2D lines

Parameters:

Name Type Description Default
line1 Line2D

Line2D

required
line2 Line2D

Line2D

required

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(line1, line2, partiallyToo=False) staticmethod

compare of 2 3D lines

Parameters:

Name Type Description Default
line1 Line3D

Line3D

required
line2 Line3D

Line3D

required
partiallyToo bool

Lines have not be identical but is enough that one lies on the second

False

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(arc1, arc2) staticmethod

compare of 2 2D arcs

Parameters:

Name Type Description Default
arc1 Arc2D

Arc2D

required
arc2 Arc2D

Arc2D

required

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(arc1, arc2) staticmethod

compare of 2 3D arcs

Parameters:

Name Type Description Default
arc1 Arc3D

Arc3D

required
arc2 Arc3D

Arc3D

required

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(phed1, phed2) staticmethod

compare of 2 3D Polyhedra

Parameters:

Name Type Description Default
phed1 Polyhedron3D

Polyhedron3D

required
phed2 Polyhedron3D

Polyhedron3D

required

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(el1, el2) staticmethod

compare of 2 Spline 2D

Parameters:

Name Type Description Default
el1 Spline2D

Spline2D

required
el2 Spline2D

Spline2D

required

Returns:

Type Description
bool

true when overlapped, otherwise false

Overlapped(geo1_object, geo2_object) staticmethod

compare of 2 Geometries

Parameters:

Name Type Description Default
geo1_object object

IGeometry

required
geo2_object object

IGeometry

required

Returns:

Type Description
bool

true when overlapped, otherwise false

signum(a, tol) staticmethod

sgn function

Parameters:

Name Type Description Default
a float

Number of which to compute sign

required
tol float

tolerance

required

Returns:

Type Description
float

0, 1, -1